Stainless Steel Liquid Beverage Milk Hot Water Insulated Storage Tank

Tag:Stainless Steel Liquid Beverage Milk Hot Water Insulated Storage Tank

Structure
Stainless Steel storage tank are made of imported SS304 or SS316L according to GMP technical conditions, the tank body polishing, there are two open cylinder head for cleaning, the bottom of the cone, the outlet is easy to discharge, can be Pipe connection, facilitate the continuous entry of various ingredients, with a discharge port below. Our long-term commitment to a variety of different specifications, different uses of container R&D and production of containers, after many years of development, our production technology and product quality have been continuously improved, as small as 50L to 100000L of outdoor storage tanks, Our products are widely used in dairy products, beverages, alcohol, grease, medicine and biology industries.
Technical Parameters Features
The tank is connected with the same or different forms of head structure, in the form of a jacket or a single combination of different requirements noted in a device structure.
Suit in many kind of liquid product
Easy transport&store
OEM&ODM welcome
Better seal effect with a PTFE O-ring
It's more convenient to operate the lid with a clip desigh
Agitator: Top mechanical agitator (propeller, spiral and anchor or others)
Pressure: ATM or pressure vessel (-0.1~1Mpa)
Jacket type: dimple jacket, full jacket, or coil jacket
Components: vent filter, temp. gauge, level gauge, manhole, sight glass with lamp and cleaning ball or according to client's detail requirement.
Manufacture standard for pressure
Product Show





About HUNDOM
Guangzhou Hundom Machinery Equipment Co., Ltd.has been manufacturing colloid mill, jacketed kettle, rotor pump, mixing tank and other machinery equipment for 14 years , putting quality as our first consideration. We own a team with rich experience in the field, if you have any question, contact us for the professional answer.
Guangzhou Hundom Machinery Technology Co.,Ltd.
Add:No. 115, No. 7, Haina Industrial Park, Shibi Street, Panyu District, Guangzhou City, Guangdong Province, China
Sales:Shum
Tel:+86-020-89081205
Mobile:+86-138-2213-4643

Welcome to visit our factory !

 Introduction and Characters:

Helical Speed Reducer uses drive at all levels to achieve the purpose of decelaration. It is widely used in chemical, cement and steel, mining and crane, textile and printing and so on. It has following characters: 1. Highly standard modular designation 2. reach big ratios and low output speeds. 3. No strict limitation to mounting arrangement 4. high strength, compact dimension 5. long service life 6. low noise 7. The efficiency of helical speed reducer can reach 95%, the efficiency of worm can reach 89%. 8. Large radial loading ability 9. Axial load ability of up to 5% of radial load.

Site conditions:

Helical speed reducer are suitable for the operation sites in the ambient temperature from -10℃ to +40℃ and altitude up to 1000m above the sea level.

Types:

Now we mainly produce R helical reducer, K helical reducer, F helical reducer, S helical reducer, which also is used in industry most.

R helical speed reducer: Foot mounted units of two or three stages

RF helical speed reducer: B5 flange mounted units of two or three stages helical gears.

RX helical speed reducer: Foot mounted units of single stage

RXF helical speed reducer: Flange mounted units of single stage helical gears

GR-R helical speed reducer: Combined types of two different types.

S helical speed reducer: Foot mounted helical worm gear units with solid shaft

SA helical speed reducer: Helical-worm gear units with hollow shafts

SAZ helical speed reducer: B14 flange-mounted helical-worm gear units with hollow shaft

S．R helical speed reducer: Combined types of series S and series R

K helical reducer: Foot mounted solid Output Shaft

KF helical reducer: Shaft mounted , hollow output shaft

KAF helical reducer: B5flange mounted, hollow output shaft.

Type selection:

The type of units are normally selected by customers to meet transmission mounting arrangement requirement. Series R and series F are applied to the conditions that input shaft and output shaft are parallel; Series S and K are applied to the conditions that input shaft and output shaft are vertical. 

Helical Gear Reducers

Helical Gear Reducers,Helical Gear Parallel Shaft Reducer,Helical Worm Geared Speed Reducer,F Helical Gear Reducers

JiangYin JiaYou Reducer Co., Ltd. , http://www.general-reducer.com