Single Barrel Seeder Hx-A004)

2018-11-02 05:01:06
  • Model NO.: HX-A006
  • Application Field: Agriculture
  • Planting Machine Type: Seedling Planting Machine
  • Power Source: Manual Labour
  • Ditching Mode: Continuous Ditching
  • Condition: New
  • G.W.: 21kgs
  • Trademark: N/M
  • Specification: 81*41*43CM
  • HS Code: 843230190
  • Application: Corn, Peanut, Beans, Cotton
  • Function: Dual Seeding and Fertilization
  • Fertilizing Machine Type: Full-size Fertilizer
  • Mechanization: Simple Planting Machine
  • Sowing: Dibble Seeder
  • Package: 6PCS/CTN
  • Size: 81*41*43cm
  • Transport Package: 6PCS/CTN
  • Origin: Taizhou

Single Barrel Seeder Hx-A004)
Single Barrel Seeder Hx-A004)
Single Barrel Seeder Hx-A004)
Production Introduction
This tool is suitable for the cultivated soil,especially the sandy soil,and suiable for the seeds like as corn,beans and so on.It can not only sowing but also can fertilizer, but can not work together.One man hold one seeder can sowing seeds 8000-10 000  per day,the efficiency is 4-5times than the manual work.Sowing seeds according to the season and time,will not delay the sowing-time,enhance the output.Especially,the hilly area where can not use the big machine,the seeder is very inportant at these areas.
The tool has some excellences:
1.We can seeding 1-3 seeds by adjusting the planting plastic borad,and you can according your requirment to select the exact position and put into the plastic borad. And then you will get the exact seeder number for your planting perpose. In the meantime they have the fertilizer cannulation, you also can adjust the quantity of the fertilizer, it from 1g to 30g you can adjust. 
2.It is easy to tear down the spindle and wheel,settling the trobles on the spindle and wheel's teardown and seeds-clothing's cleanout.
Methods of the seeder's use
1,Put the seeds into the seeder's box, or put the fertilizer into the fertilzer's box. Using the hands to take up the seeder, insert the mouth(sowing mouth or fertilizer mouth) in the soil, then lift the seeder until the mouths leave the soil.
Notice:the mouths insert into the soil until the mouth come into the soil completely. Hold the speed of the lifting, don't too quickly or slowly, if too quickly maybe the seeds or fertilizer are came out,if too slowly, the mouths close slowly, then the seeds or fertilizer which use for next wrok are not leave at the mouths, but come into the soil dangle after the former seeds or fertilizer .

Plastic Products are made of plastic and polymerized by polymerization or condensation polymerization, commonly known as plastic or resin. It is free to change composition and form. It is composed of synthetic resin and fillers, plasticizers, stabilizers, lubricants, lubricants and other additives.

Plastic products: plastics as the main raw materials, using injection, detain, hollow forming and other processing technology into various plastic products or components

Plastic, resin (or directly in the machining process using monomer polymerization) as the main ingredient, plasticizers, fillers, lubricants, additives for auxiliary ingredients such as colorants, can flow in the processing process molding material.

Rubber is divided into natural rubber and synthetic rubber.

Natural rubber is mainly derived from hevea, when this kind of rubber skin was cut open, will flow out milky juice, called latex, latex via condensation, washing, molding, drying for a quick natural rubber.

Synthetic rubber is made by artificial synthesis and different kinds of rubber can be synthesized by using different raw materials (monomer).

Plastic Products

Injection Molding Drop Plastic Type,Plastic Blow Molding,Glue And Spray

Shenzhen Baoan District Shai Cheng Zhi Bin Hardware Products Factory , http://www.sz-cthj.com