In the wireless monitoring system , the wireless bridge serves as a bridge between the front end and the back end. Transmission is wireless, convenient, and simple. In practical applications, how should wireless bridges be set up? What are the erection methods?
The practical application of wireless bridges should be based on the specific environment and project conditions to determine the installation. Generally, there are three common methods for establishing a wireless monitoring system wireless bridge: peer-to-peer, relay, and point-to-multipoint wireless transmission. What exactly are the three transmission methods?
First, for example, suppose that a project has two points AB, A represents the monitoring point, and B represents the middle of monitoring. The distance between AB points is visible, and there is no obstruction in the middle; in this case, we can use point-to-point transmission directly.
The specific point-to-point transmission method is as follows: A wireless bridge transmitter is installed at point A, and a wireless bridge receiver is installed at point B. The wireless bridge is connected to the front camera rear-end recorder or computer via a network cable. There is no shelter between the two ends. Two points network can think through.
Secondly, suppose the distance between two points of AB is blocked by a building. Two points must be elevated or relayed to achieve wireless transmission. Because the shielding is high, we use relay mode to transmit and set the relay point in the middle. The top floor is called C point. AC and BC can achieve the visual distance, then we only need to add a set of wireless bridge at point C, as the relay point bridges the signal between the two points AB.
Finally, it is also assumed that the AB point can be viewed at a distance without blocking between two points, and the distance between the two points is about 1 km. Camera points are distributed more densely and in larger quantities. According to this situation, we can adopt a point-to-multipoint approach, that is, multiple launches and single receptions. This method is more suitable for building a wireless monitoring system at a short distance.
To integrate the above three wireless bridges, use appropriate wireless monitoring engineering solutions based on our existing engineering analysis. Of course, the flexibility of wireless transmission will inevitably determine that these three methods are not the only ones available. These three methods are only common in ordinary wireless monitoring systems. Special circumstances special treatment. Of course, if you have any questions, you can consult our WeiFeng wireless manufacturer customer service. They will provide the most suitable wireless transmission method in the most professional manner.
We offer
a full range of horizontal centrifugal slurry pumps for mining, chemical and
industrial applications to our customers worldwide. They are designed with
single-stage, single-suction, double casing structure which is suitable for a
wide range of slurry transport applications. The
strength of our horizontal
Centrifugal Slurry Pump range lies in the superiority
of our advanced hydraulic designs and our high-performance materials built
with, excellent wear
resistance and corrosion resistance, shortening maintenance time, and helping
our customers reduce operating costs.
Horizontal Centrifugal Slurry Pump
Horizontal Centrifugal Slurry Pump,Slurry Pump,Centrifugal Slurry Pump,Horizontal Slurry Pump,Variable Speed Drive Slurry Pump
Shijiazhuang Soarho Machinary Co.,Ltd , https://www.xhslurrypump.com