Hardware processing parts

Metal processing is the raw materials (stainless steel, copper, aluminum, iron ... ...), with lathes, milling machines, drilling, polishing, etc. machinery according to customer drawings or samples processed into a variety of parts, Such as: screws, motor shaft, model car parts, fishing accessories, speaker products shell, mobile power shell, and so on.

Hardware processing process is based on the production needs of the open material, after a few good parts such as the production of small parts can go to the punch and then cut or CNC processing, which in the glasses accessories, auto parts production a lot. And do the container: is to open the press after the punch to burn, and then after the sanding for fuel injection, and then assembled about the parts can be shipped. And for the hardware accessories but also a lot of polished surface after the appearance, plating or fuel injection. And ...... Resultss. Refinding composition composition composition Resultss.

1, paint processing
Hardware factory in the production of large pieces of finished metal products are used in the paint processing, through the processing of hardware to avoid rust, such as: daily necessities, electrical appliances, handicrafts, etc.
2, plating
Electroplating is also the most common processing of metal processing technology, through the modern process technology on the surface of metal plating, to ensure that the product is not used for a long time under the moldy raw embroidery, electroplating processing are common: screws, stamping parts, Pieces, small jewelry, etc.,
3, surface polishing processing
Surface polishing is generally used in daily necessities, through the metal products on the surface of the burr treatment, such as: we produce a comb, comb is made of stamping hardware, then stamping out of the comb corner is very sharp, we It is necessary to polish the corners by the sharp part of the cast into a smooth face, so that the use of the process will not cause harm to the human body.
Turning the outer surface is the basic method of machining the outer surface in the metal processing. The equipment used is the lathe. In the general machinery factory, the lathe accounted for about 40% of the total number of machine tools. Turning is the main method of roughing and semi-finishing all kinds of materials, and it is also the final finishing method of various materials that should not be ground.
Single-piece small batch production, turning the circumference of the general in the ordinary lathe. Large quantities of production, the extensive use of multi-knife semi-automatic lathes or automatic lathes. Large disk parts should be processed on a vertical lathe. Large shaft parts need to be machined on heavy duty horizontal lathes