Drying process, the lifeline of the quality of solid wood flooring

In the face of a more confusing solid wood flooring market, how to choose qualified solid wood flooring has become a difficult problem for consumers. In this regard, Green Park solid wood flooring supermarket Lanzhou shop, Fengsheng flooring and other professionals believe that: The key to decide the quality of the floor is whether the drying process through. The purpose of drying the solid wood floor is to make the wood achieve a balanced moisture content, and dry the resin in the trunk to prevent its deformation, cracking, insect damage, improve the mechanical strength and service life of the floor, which is an integral part of processing solid wood flooring. Important process. The balanced moisture content of wood in Lanzhou is 11.3%, while the national standard is 8%–14%. Only the equilibrium water content below the sales area can truly ensure the stability and durability of the floor. Therefore, the floor moisture content in Lanzhou needs to be controlled within 11.3%. Some manufacturers do not have drying equipment or the technology is not up to standard. Product moisture content is too high, so there has been cracking, deformation, insects and other phenomena, Green Park, Lanzhou, solid wood flooring supermarkets to remind consumers to pay attention to the purchase of solid wood floors must be on-site detection of the floor moisture content, but also pay attention to its processing technology, The method is to take out a piece of floor on the ground and make a geometric mosaic to see whether the chamfer is even and whether the gap between the floors exceeds 0.1 mm, thereby judging the accuracy of the floor processing.

We have our own forging factory and all the parts are made by forging, turning, hobbing, shaving, chamfering, heattreatment, etc. Every process is controled by QC stricktly. We also have our own heattreatment workshop. We are all looking for ways to increase production without sacrificing quality. One of the most cost-effective ways is by improving the substrate material of the hob. Solid carbide hobs are widely used in many applications throughout the world. Since then the process of dry hobbing has been continuously improving through research and product testing. Dry hobbing is proving to be successful in the gear cutting industry as sales for dry hobbing machines have steadily been rising along with the dramatic increase in sales of solid carbide hobs.


Gearbox Pinion for agriculture tractorTractor gear steel hardened gear

110960T1

111316T1

110980T1

MF660 Gears

Mf660 Gears,Small Mf660 Gears,Forging Mf660 Gears

Qijiang Yongyue Gear Co.Ltd , http://www.yongyuegear.com