Electric vehicles do not need batteries for a long time to charge once a month

"I can't recharge, this group of lead-acid batteries is scrapped!" The electric car that was "injured" two months ago was sent to repair, but found that its core components have deteriorated.
It turned out that the electric car accidentally turned over when turning, the two wires were broken, and the battery could not be directly charged. After the original electric energy is used up, the electric car is put aside. Recently, he sent the electric car to the repair shop for repair. After the repairman connected the broken wire, he measured it with a universal meter. The voltage across the battery was only 2 volts, and the normal value was 12 volts. Basic retirement.
The car repairer said that electric vehicle users should use the correct method to maintain the battery to increase its service life. The battery cannot be stored in a deficient state, otherwise it will be prone to sulphation, resulting in insufficient charging and a decrease in battery capacity. If the electric vehicle is not used for a long time, the battery cannot be "fake", and it must be fully charged once a month. In addition, when cleaning the electric vehicle, do not directly wash the car body with water, otherwise it may cause the coil and other short-circuit to burn.

Ceramic Plate And Blocks are widely used in many fields because its good performance in using.

The main characteristic of Ceramic Plate and blcok will as following:

product name	ceramic plate and block
material	zirconia ,alumina,silicon nitride
color	white(ivory),yellow,black,blue and customized colar
size range	max 350 mm(L)*350 mm(W)*40 mm(T)
surface roughness	max RA 0.05 um
tolerance	+/-0.001 mm
max using temperature	alumina 2000℃,zirconia 1500℃
electric insulation	good insulator
corrosion  resistance	excellent resistance to acid and alkali even in high temperature condition
hardness	HRA 85-91

The main raw material of the ceramic plate and block is alumina and zirconium oxide. The quality and purity of the raw powder directly influence the performance of the wear-resistant ceramic plate.

The color of 97% alumina ceramic plate is white, and 99% alumina ceramic plate is light yellow, and the surface of good quality ceramic plate will appear the texture of jade.

Ceramic Plate And Block

Ceramic Plate,High Temperature Ceramic Block,Porous Ceramic Block,Machining Ceramic Block

Dongguan Mingrui Ceramic Technology Co.,Ltd , http://www.mr-ceramics.com