The Three Science and Technology Plan Projects of the General Administration of Quality Supervision, Inspection and Control in Inner Mongolia Passed Acceptance

[China Instrument Network Instrument R&D] On December 13, the Quality and Technical Supervision Bureau of Inner Mongolia Autonomous Region was entrusted by the Science and Technology Department of the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, and a site acceptance meeting was held at the Special Inspection Center of Chifeng City. The three special quality inspections of the Chifeng City Special Inspection Center were undertaken. Inspection and Quarantine Bureau's Science and Technology Plan Project “Development of Intelligent Inspection System for Fixed Pressure Vessels Based on Damage Models” (Project No. 2015QK022) and “Risk-Based Safety Assessment of Liquefied Petroleum Gas Cylinders” (No. 2015QK023) ), "speed limiter rope tension tester" (number 2016QK080) passed the acceptance.

(Image from the network, invade)

The acceptance meeting was presided over by Yan Chunxiang, Director of the Science and Technology Information Division of Inner Mongolia Bureau of Quality Supervision. Wang Xingquan, Director of the Special Inspection Institute of Chifeng City, attended the acceptance meeting and delivered a welcome speech.

In his speech, Director Wang stated that the Chifeng Special Inspection Institute will take this check and acceptance meeting as an opportunity to further implement, deepen, and reduce the strategy of “scientific and technological inspection”, and give full play to the development of scientific and technological innovation in the development of special inspections. Leading the role and making every effort to promote the special inspection business to a higher and deeper level.

At the meeting, an acceptance committee composed of experts from institutions of higher learning, special inspection institutes and other units carefully listened to the report of the project team, reviewed relevant information, and conducted questions and discussions. After rigorous and meticulous analysis and review, an acceptance check was formed. opinion. Based on the “Injury Mode-based Development of an Intelligent Generation System for Fixed Pressure Vessels Periodic Inspection Scheme”, a fixed pressure vessel damage model database, a standard logic database, and a field detection database were constructed; based on the internal relationship between damage patterns and solid-to-capacity regulations, A typical fixed pressure vessel inspection test program and its inspection process were adopted; a multi-module and intelligent software system was developed using a database program and a visual programming language, and intelligent generation and application of a fixed pressure vessel regular inspection program was realized. The project applied for 1 patent, published 2 papers, registered 1 software copyright, completed the stipulations of the AQSIQ project plan, and agreed to pass the acceptance check.

The "Risk-Based Safety Assessment Technology for Extended LPG Cylinder Safety Bottles" builds a risk-based liquefied petroleum gas cylinder safety assessment system, establishes a cylinder fault tree and risk analysis matrix model, and develops an extended-period liquefied petroleum gas cylinder based on an expert system. The intelligent fault inquiry and safety assessment software proposes a risk assessment method for extended use of LPG cylinders in the extended period, and provides tools for fast failure inquiry, safety assessment and information management of LPG cylinders. The project applied for 2 patents, published and accepted 2 papers, registered 1 software copyright, drafted 1 draft standard of “Safety Inspection and Assessment of Liquefied Petroleum Gas Cylinders for Extended Use”, and completed the requirements of the AQSIQ project Indicators, agreed to pass the acceptance.

"Speed ​​Limiter Rope Tension Tester" analyzes the factors affecting elevator lifter force and speed limiter rope tension, researches and designs force measuring structure and its support, and has developed a portable, intelligent elevator speed limit. The rope tension testing device realizes the on-site detection of the rope tension of the elevator speed limiter and the lifting force of the safety gear. The project applied for 3 patents, completed 3 papers, and 1 set of “Speed ​​Limiter Rope Tension Tester”. It completed the targets specified in the mission statement of the AQSIQ project and agreed to pass the acceptance check.

It is reported that the Chifeng City Special Inspection Center has always placed scientific and technological innovation at the core of special inspection development, actively implemented the strategy of "scientific and technological inspection," and vigorously constructed a full-staff innovation mechanism to create a strong atmosphere of scientific and technological innovation in the institute. At the same time, through the addition of special equipment technology collaboration platform and a long-term strategic cooperative partnership with Dalian University of Technology, the level of scientific and technological innovation has been raised. In the past three years, the Chifeng City Special Inspection Institute has successively undertaken 4 science and technology plan projects of the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, 2 scientific research projects of the quality inspection system of the autonomous region, 2 local standards of the autonomous region, 1 municipal scientific and technological progress award, and 8 patent grants.

(Original title: The three AQSIQ scientific and technical plan projects undertaken by Chifeng City Special Inspection passed the acceptance check)