High Quality 304 Stainless Materials Test Temperature Humidity Test Machine

2022-11-27 11:05:10
Model NO.: ZH-TH-225A
Humidity Range: 10%~98% Relative Humidity
Temperature Cooling Speed: 1degree ~ 20 Degree Per Min, Customized
Service: OEM / ODM / Non-Standard Available
Power Supply: AC220V/AC380V, Customized
Temperature Range: -70~150 Degree
Cooling System: Water Cooling / Air Cooling
Inner Material: SUS304 Stailess Steel
Heating Rate: 4 Degree/Min
Trademark: Sailham
Transport Package: Wooden Case
Specification: Customization available
Origin: Guangdong, China
HS Code: 8479899990
High Quality 304 Stainless Materials Temperature Humidity Test Machine/Chamber


Product Description
 Humidity and temperature tester are available as standard products in a variety of sizes to suit your needs. Our environmental test chambers are often used for steady-state stability testing, basic temperature cycling and accelerated stress testing. In keeping with the needs of today's lab, we designed these temperature and humidity test chambers to have a compact exterior that maximizes the interior workspace. 

 

Lowest temperature: -20 or -70°C (-4 or -100°F)
Highest temperature: 150°C (302°F)
Humidity range: 10 to 98% RH
Chamber size: 2.9 cubic feet
Touch-screen Watlow F4T programmer with Ethernet access


High Quality 304 Stainless Materials Test Temperature Humidity Test Machine



Technical parameters
Model ZH-HS-80(A~F) ZH-HS-150(A~F) ZH-HS-225(A~F) ZH-HS-408(A~F) ZH-HS-800(A~F) ZH-HS-1000
Inner size: WHD(cm) 40*50*40 50*60*50 60*75*50 60*85*80 100*100*80 100*100*100
External size: WHD(cm) 105*165*98 105*175*108 115*190*108 135*200*115 155*215*135 155*215*155
Temperature range (Low:A:+25ºC; B:0ºC;C:-20ºC; D:-40ºC;E:-60ºC;F:-70ºC) (High:+100ºC/+150ºC)
Humidity range 20%~98% R.H.(10%~98%R.H);(5%~98%R.His special optional condition)
Temp analytic accuracy/uniformity 0.1ºC/±2.0ºC
Temperature Fluctuation ±0.5ºC
Humidity analytic accuracy/ Humidity  control accuracy ±0.1%;±2.5%
Heat; cooling time Heat up about 4.0°C/min ;  Cooling about 1.0°C/min
Inner and outer materials SUS#304 Stainless steel for inner chamber ; Carton Advanced cold plate nano paint for outer
Insulation materials Resistant to high temp ,high density,formate chlorine,ethyl acetum foam insulation materials
Cooling system Air cooling/single segment compressor(-40°C) ,air and water double segment compressor (-50°C~-70°C)
Protection devices Fuse switch, compressor overload switch, refrigerant high and low pressure protection switch,super humidity over-temperature protection switch, fuse, failure warning system
Parts Watching window , 50mm testing hole , PL internal bulbs , Wet and dry bulb gauze , partition plate , castorx4,Foot Cupx4
Compressor Original France"Tecumseh"brand
Controller TEMI South Korea
Power AC220V 50/60Hz & 1, AC380V 50/60Hz 3
weight (kg) 150 220 270 320 450 580


 

Core accessories 

High Quality 304 Stainless Materials Test Temperature Humidity Test Machine


Manufacture process

High Quality 304 Stainless Materials Test Temperature Humidity Test Machine


Features
High performance and quiet operation (65 dBa)
Space-saving footprint, designed for flush installation to wall
Stainless steel exterior
Full thermal break around doorframe
One 50mm (2") diameter cable port on left, with flexible silicone plug(special requirement)
Three levels of overheat protection, plus overcool protection
Easy lift-off service panels, electrical access on left
Detachable eight-foot power cord with plug
Direct water supply connection for continuous operation (supply tank optional)
ETL listed electrical panel conforming to UL 508A

 


Our Factory
High Quality 304 Stainless Materials Test Temperature Humidity Test Machine




Honorary Certifications:
High Quality 304 Stainless Materials Test Temperature Humidity Test Machine





Exhibitions and customers visit our factory

High Quality 304 Stainless Materials Test Temperature Humidity Test Machine





FAQ:

Q: What's the payment term?

A: T/T, L/C and other payment terms could be negotiated.

 

Q:Do you accept customization service?
A:Yes, of course, we can not only offer standard High and Low Temperature Alternating Damp Heat Testing Chamber, but also customized machines according to your request. Don't hesitate to tell us your requirement, we will try our best to meet your needs.

 

Q:How about your warranty?
A:Generally, our warranty is one year. Within the warranty period, we can offer technique support, Feedback to you within 24 hours and help you to repair your problem controller freely, even it's not from our factory 

 

Q:Can we visit your factory before order?
A:Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to arrange hotel and pick up you from airport.

 

Q: What's the delivery term?
A:At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making special arrangement for you.

 

Q:How about the packing for machine, is it safely protected during transportation?
A: Testing Chamber is packed by standard export wooden box for outside package and stretch film for inner package, it won't be damaged. We've delivered many testing machines abroad by sea or by air without damage.




Contact US
Tel :+86-769-81105095    
Fax:+86-769-22400804
Website :www.sailham.com     
Company Address:1612 Huiyi Fortune Center Building, Intersection of Bulong Rd. and Longguan Rd., Longhua new district, Shenzhen, Guangdong, China
Factory    Address: NO.53,Jin Yuan Xin Road,Shi Long Keng,Liao Bu Town. Donggaun. Guangdong China (Mainland)

 

Dust Mite Vacuum

Dust Mite Vacuum,Dust Free Vacuum Cleaners,Dust Mite Vacuum Cleaner,Wireless Dust Mite Vacuum

GUANGDONG DEERMA TECHNOLOGY CO., LTD. , https://www.deermaglobal.com