Chicago 4-11 Alarm Fire 12-29-12 (pt 1)

A commercial fire broke out at 2441 W. 21st Street shortly after 1 PM today. First-arriving units found a three-story, brick commercial factory/warehouse fully involved in flames. The alarm quickly escalated to a 4-11 with an EMS Plan I and a Haz Mat Level I. The building was bordered by railroad tracks on the west and the elevated CTA tracks on the north, which were shut down for several hours. EMS operations were secured quickly, and the 4-11 wasn’t called off until around 4 PM. Some companies remained on scene throughout the night. Two Snorkels (Squad 1 and the reserve) were working alongside four tower ladders (5, 10, 39, and 54). Multiple contributors provided extensive coverage, which will be shared in several posts tonight and tomorrow. **From Josh Boyajian:** Even though I wasn't at the scene, I wanted to share these photos from Laramie and Ogden in Cicero showing the massive header! ![Header from Cicero](attachment_17023) *The header as seen from Cicero. Josh Boyajian photo* ![Header from Cicero](attachment_17024) *Chicago 4-11 Alarm fire at 2444 W. 21st Street 12-29-12 as seen from Cicero, IL. Josh Boyajian photo* **From Erick Haak:** Not much to say other than the last photo shows the wall collapsing. Photos credited to Eric Haak. ![Tower Ladder 54 working](attachment_17025) *Chicago Tower Ladder 54 working on 21st Street with a master stream. Eric Haak photo* ![Massive flames](attachment_17026) *Phenomenal fire in Sector 1 at the Chicago 4-11 Alarm fire at 2444 W. 21st Street 12-29-12. Eric Haak photo* ![Wall collapse](attachment_17027) *The wall collapse in Sector 1 as seen from the west end of 21st Street. Eric Haak photo* ![Front wall collapses](attachment_17028) *The front wall collapses onto 21st Street at the 4-11 Alarm fire 12-29-12. Eric Haak photo* **From Dylan Konchan:** Hi, my name is Dylan Konchan. I have some photos from the 4-11 alarm at 2441 W 21st. More to come. ![West end of the structure](attachment_17030) *The west end of the structure as fire burns through the roof as seen from the north (Sector 3). Dylan Konchan photo* ![Reserve Snorkel entering lot](attachment_17034) *The reserve Snorkel enters the lot behind the building in Sector 3 as heavy fire burns through the roof. Dylan Konchan photo* ![Snorkel moving into position](attachment_17031) *The reserve Snorkel (6-6-1) moves into position to go to work. Dylan Konchan photo* ![Snorkel ready to work](attachment_17032) *The reserve Snorkel is ready to work as an elevated master stream in Sector 3. Dylan Konchan photo* ![Heavy fire and smoke](attachment_17033) *A glimpse of the heavy fire and thick smoke in Sector 3. Dylan Konchan photo* **From Drew Gresik:** Hey everyone, I just drove into the city to check out the 4-11 with Level 1 Haz-Mat and EMS Plan 1 at 2444 W 21st Street. The header was huge—I saw it all the way in Berwyn on Ogden Avenue. When I got near the fire, the Chicago Police had set up a four-block perimeter, so I couldn’t get close. Staging was at 22nd and Western, and traffic was terrible. Here are some shots of the header and Engine 113 speeding down 22nd Street. Keep up the good work on the site guys! ![Header from Berwyn](attachment_17039) *The header as seen from Berwyn. Drew Gresik photo* ![Heavy smoke](attachment_17035) *Heavy smoke seen from nearby. Drew Gresik photo* ![Large header](attachment_17036) *Large header as seen while driving to the fire. Drew Gresik photo* ![Engine 113 nearing the scene](attachment_17037) *Engine 113 nearing the scene of the 4-11 Alarm fire on December 29, 2012. Drew Gresik photo* ![Flames and smoke](attachment_17038) *Flames and heavy smoke seen from several blocks away. Drew Gresik photo* **From Steve Redick:** Chicago 2444 W. 21st St today…Mill Constructed furniture warehouse…a quick photo and a link to my video with radio traffic. Lot’s more to come…stay tuned… ![Firestorm conditions](attachment_17029) *Firestorm conditions with heavy wind, intense flames and thick smoke in Sector 1 of the 4-11 Alarm fire at 2444 W. 21st Street in Chicago. Steve Redick photo* Steve Redick video: **From Dave Weaver:** Anatomy of the 4-11: 13:08 E23 looking for rubbish 2500 W. Cullerton St. / Full Still b/o Main FAO for 2444 W. 21st St. 13:13 Still & Box Alarm b/o Batt 4 for 3 story 200×100 smoke on 2nd fl and heavy smoke from several 1st fl windows 13:20 2-11 Alarm b/o 2-2-1 reports heavy fire throughout 3 story warehouse 200×150 Companies go defensive Batt 2 requests CTA Pink Line be shut down 13:31 2-2-1 requests additional TL and reserve snorkel Corrected size-up by 2-2-1 is at least 300×150 13:38 3-11 Alarm b/o 2-1-28 plus 2 additional TLs 13:45 4-11 Alarm / EMS Plan 1 / Level 1 HazMat b/o 2-1-28 13:58 2-7-1/Batt 4 4 master streams on West side of building making little progress 14:00 EMS Plan 1 secured b/o 2-1-28 14:04 2-1-3 in command / All officers switch to Ch 5 Command 14:30 2-7-1/2-1-3 11 master streams working, gas company digging in Sector 1 to shut off main, 1 line to sprinkler system in Sector 4 Radio traffic: [Part 1](www.justin.tv/radioman911/b/352277818) [Part 2](www.justin.tv/radioman911/b/352275440) [Part 3](www.justin.tv/radioman911/b/352272510) Dave Weaver video: Apologies for the late post and the delay in compiling everything. This was a major incident with significant resources and a large response. Stay tuned for more updates.

Mild Steel Plate

Low carbon steel is the most common form, and it's very malleable and ductile. Medium carbon steel balances ductility as well as strength for excellent wear resistance. High carbon steel is exceptionally strong, while ultra-high carbon steel can be tempered to even greater hardness but no malleability.

Mild steel is a type of carbon steel with a low amount of carbon – it is actually also known as [low carbon steel." Mild steel is not an alloy steel and therefore does not contain large amounts of other elements besides iron; you will not find vast amounts of chromium, molybdenum, or other alloying elements in mild steel. Less carbon means that mild steel is typically more ductile, machinable, and weldable than high carbon and other steels, however, it also means it is nearly impossible to harden and strengthen through heating and quenching.

Mild steel is a type of carbon steel that only consists of a low amount of carbon. The amount of carbon that is typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels usually have a carbon content of 0.30% to 2.0%.

Less carbon means that mild steel is typically more machinable, weldable, and more ductile. However, it cannot be used for purposes that require hardening and strengthening – heating does not harden this kind of steel.

mild steel sheet plate,Mild Steel Sheet Metal,Mild Ship Building Plate,St37 Mild Steel Plate

SHANDONG HUITONG STEEL CO.,LTD , https://www.cnhuitongsteel.com