How to test motorcycle driving license and examination process
If you stand on the street, you'll find some motorcycle without a license and not wearing a helmet cycling people everywhere, although Jin Mo policy of the country is indeed in some respects there is a "one size fits all" the defects, However, most people's disregard for the rules of motorcycle road driving has indeed proved the original purpose of this policy.
Like a car, driving a motorbike on-road driving license is also essential. Not only that, it is more stringent for motorbikes to learn driving rules than to test car licenses. Therefore, driving a motor vehicle on the road must have complete documents, and one must ensure personal safety. Here, Xiao Bian put together the process of motorcycle driving test and some tips for everyone.
Motor vehicle driving license examination content:
1 subject one, that is, the theoretical examination, the basic use of computer tests.
2 subject two, namely the venue exam, the main drill pipe.
3 Subjects 3, namely road test, single-plank bridge, ramp start, right-angle bend, fixed-point parking, etc.
Venue exams and road tests:
Drill pipe site data:
(1) The distance between the pile and the sideline is 30 cm wide (about 1 meter away from the sideline);
(2) Pile spacing: ordinary and light motorcycles add 50 cm to the captain; regular tricycles add 40 cm to the captain; side tricycles add 80 cm to the captain; (2 rounds are generally 2.5 meters To 3 meters)
(3) The line length is 3 times longer than the last stake.
The general requirements are:
1, drill 5 rods, s-type, spacing 2.5m, both sides of the white line has more than 1m, pressure line, hit the rod, turn off out, drilled around the circle and drill back;
2. Two single-wood bridges, about 3m long, more than ten cm wide, 125px high, two 2m apart, one on the left, one on the right, and the left and right two meters away require that the front and rear wheels should not fall and must not turn off;
3, right-angle turn, road width 1m, can not pressure line;
4, ups and downs, the three pits with cement, about 125px deep, require not to turn off;
5, s road, two s-type roads, can not pressure line;
6. Start at half slope, about 30 degrees slope, white line in the middle of the slope, stop on the front wheel pressure line, then start from a new start, ask for a start, do not turn off, back can not exceed 750px ;
7, fixed-point parking, approaching the traffic police in front of a white line, requiring the front wheel to stop on the white line;
Road test skills:
1. Choose a small car with a small displacement car. Curved beams are suitable.
2. Remove the bumper bumper and remove the trunk.
3. The engine algebra can be moved slowly without turning off the throttle.
4. Wear a helmet so you won't find you trouble;
5. Don't turn the steering to death when winding the pile.
6. Stick as much as possible around the pile. The handlebars on one side of the pile should be 5 to 10 centimetres away from the pile. After the car passes, the handlebars on the other side should try to maintain this distance when approaching the next pile.
7. There are conditions to get a few 2 liters of large cola bottles filled with water 5 cm high, insert a few sticks above the handlebars on the line, they practice, distance of 2 meters 5 on the line;
8. Before the exam, listen to the police's explanation, where to go from, where to go, and the driving route must be correct.
9. Ample time to visit the local examination situation, and then test.
Cornering points: 1, do not panic 2, do not refuel, just use the car's speed 3, do not step on the brakes 4, do not squeeze the clutch (just like riding a bike), practice several times generally pass.
Uphill starting points: 1, the oil is slightly larger 2, with the foot brake 3, hear the engine after the slow release clutch, and then slowly loose brake start
I hope that after you read this article, the exam will go smoothly! ! !
Floor Deck Roll Forming Machine produce Metal Decking,Cellular Metal Floor Decking,Composite Metal Form Decking,metal roof deck,and formlok deck. The floor deck is a placement of concrete, teel deck resists the vertical loads associated with the weight of the concrete and the construction loads. As the concrete cures a chemical and mechanical, shear bond forms collectively between the surface of the steel deck and the concrete. The mechanical bond is achieved via embossed features on the surface of the steel deck. The strength of a composite diaphragm (deck + concrete) depends on the shear bond and the complimentary behavior of steel and concrete in such an assembly. The steel functions as the tension element at the bottom of the beam while the concrete functions as the compression element at the top of the beam. Fllor deck roll forming machine is professional produce this high quality floor deck. with the beginning rollers with embossing , the metal deck can be roll-formed as the required profiles with patterns.
Floor Deck Rollforming Line,Scaffolding Rollformer,Slitting Machine,Bicycle Rim Roll Forming Machine
WUXI ZHONGTUO ROLL FORMING MACHINERY CO LTD , https://www.rollformertec.com