Mica tube application range and physical state

Mica tubes are high-performance silicone adhesives and high-performance silicone rubber made of hard tube insulating materials. With good electrical insulation properties and high mechanical strength, it is suitable for the insulation of electrode rods or outlet tubes of various electrical appliances, motors, smelting furnaces and other equipment. Compared with the traditional ceramic tube, the advantage of mica tube is easy to control wall thickness and ellipticity, even discharge, not easy to break, etc. It is an ideal alternative part of ceramic tube.

First of all, mica tube products:

1. Thermosetting tube Heat-resisting mica tube is impregnated with mica paper after the silicone rubber is baked by these insulating products.

2, the scope of application of mica tube:

The mica tube can be used as an electrothermal device at a temperature of 900 degrees.

3, the physical state of the mica tube:

Appearance: smooth surface, no layers, foam and wrinkles, trim marks but no more than the wall thickness tolerance index provides a slight wrinkle defect on the inner wall, cut neatly ends.

Surge Proof Junction Box

JXHS series Junction Box advanced technology during production, stresses the details during design, implements design standard during processing, and has high consistence of product quality. It has various features such as strong damp proof, anti-corrosion and anti-electromagnetic capacities and high adjustment accuracy, and is suitable for various adverse environments. Its main advantages include:
The product uses own mold to make technologic design, the housing uses aluminum and silicon alloy and upper protrusion and lower sinking structure is used so as to ensure good sealing performance; protective grade reaches IP 68.
Main parts are imported, wiring bar is welded with precise anti-surge electronic components, which can prevent Load Cell damage caused by lightning and power grid surge voltage.
Whole device uses stainless steel grounding bolts to ensure reliable grounding during operation.
Assembly of junction box uses not-loose screws so as to avoid loss during load cell wring.
Wiring board uses combined screws for assembly, which are convenient for removal.
In order to ensure protective effect, force and diameter of tightening parts have introduction.

The Junction Box,6-Wire Surge Proof Junction Box,8-Wire Surge Proof Junction Box,Surge Proof Junction Box

SHANDONG JINZHONG SCIENCE & TECHNOLOGY GROUP COMPANY LIMITED , https://www.chinagoldbell.com