· Audi suspends sales and network negotiations with SAIC

During the ten hours of intense negotiations on the afternoon of November 30, Audi AG formally agreed to suspend negotiations with SAIC on sales and networking.
Audi dealers and the German side agreed on the "December 1st" day, the terminal market Audi car prices rose. According to informed sources, after several hours of negotiations this afternoon, "SAIC Audi" was officially suspended.
Cheshang has just obtained an exclusive internal confidential document signed by Wei Yongxin, general manager of Audi China. The document said that on the basis of the Foshan communication meeting on November 21, several parties reached consensus on the three main demands of the dealers.
1. Ensure the existing and future competitiveness and profitability of the existing FAW-Volkswagen Audi dealer network.
2. Improve the regional sales network management and management capabilities of Audi Sales Division.
3. The next steps of the Audi and SAIC cooperation plans.
Among them, with the approval of FAW Group, Ren Siming, the general manager of FAW Volkswagen Audi Sales Division, and Jing Qing, deputy general manager, have begun to organize the negotiation team to deal with issues 1 and 2.
As for issue 3, Audi AG agreed to suspend negotiations with SAIC on sales and networks in view of the fact that FAW-Volkswagen Audi dealers did not reach a consensus on the cooperation between Audi AG and SAIC. After the existing dealer network has long-term and stable profitability, and after reaching a consensus with the dealer association, it will conduct further negotiations with SAIC.
However, Audi AG is not “terminating” the SAIC Audi project. It gives the time node. Before March 2017, Audi, SAIC and FAW Audi Dealer Association will negotiate again, and FAW Group will also be invited to participate.

Non-woven special equipment accessories

Non-woven fabric is a new type of modern material. It has a wide range of uses and can play more roles in clothing, agriculture and industry. The production of non-woven fabrics is also mostly mechanized, which makes it possible to produce a large number of non-woven fabrics in batches. Non-woven fabric winders are one of its equipment.

Non-woven fabric, also called non-woven fabric, is composed of oriented or random fibers. The production of non-woven fabrics often uses polypropylene pellets as raw materials, and is produced by a continuous one-step method of high-temperature melting, spinning, laying, and hot-pressing. In the production of non-woven fabrics, the raw materials need to be spun and formed and then processed. In the web-forming work, a non-woven web forming machine needs to be used. The web forming machine uses wind in the drafting duct to process the silk. After drafting, a machine for non-directional weaving into a net is carried out. However, polypropylene pellets are prone to broken filaments and stiff blocks during drawing, drafting, and web formation. Therefore, in order to improve the quality of the finished non-woven fabric, it is necessary to clean the formed non-woven fabric. When dealing with broken wires and stiff blocks in traditional web forming machines, workers usually use brushes or scouring pads behind the web forming machines to clean up. Because the belt width of the web forming machines is relatively long, and the conveyor belt speed is relatively high at the same time. Fast, the cleaning range that workers can cover is limited, resulting in low cleaning efficiency, which in turn affects the quality of the finished non-woven fabric.

The slitting machine is mainly used to cut large-format non-woven fabrics into multiple small non-woven fabrics of different widths for processing non-woven products. The equipment adopts DC speed regulation, feeding constant tension control, air knife slitting, rewinding pressure and other devices. The rewinding tightness after slitting is adjustable, and the slitting end surface is flat. The equipment is of high quality and beautiful appearance. It is the ideal equipment for the slitting of large non-woven fabrics. In addition, according to the needs of users, the equipment can also add a dummy cutting function, that is, the original fabric is dummy cut and then slit and rewinded.

Non-woven fabric machinery is a general term for the production of non-woven fabric products, and adopts an overall modular design with a compact and reasonable structure. The control part adopts advanced PLC microcomputer control, and the international famous brand frequency converter speed regulation.

Non-woven fabric high-speed slitting machine, non-woven fabric high-speed winding machine, non-woven fabric high-speed web forming machine, non-woven fabric upper and lower stretcher

Changzhou Puyisen Machinery Technology Co., Ltd. , https://www.smmsmachine.com