With the increasing use of led fixtures in home decoration, our requirements and requirements for installation are getting higher and higher. Not only is it necessary to choose a reasonable location for installation, but it also requires attention to the details of the installation. LED ceiling lamp installation points: 1. When installing ceiling lamps in masonry structure, we need to use embedded bolts or mining
With the increasing use of led lamps in home decoration, our requirements and requirements for installation are getting higher and higher. Not only is it necessary to choose a reasonable location for installation, but it also requires attention to the details of installation.
LED ceiling lamp installation points:
1. When installing a ceiling lamp in a masonry structure, we need to use pre-embedded bolts or expanded bolts and nylon races or plastic races. Remember to never use a wooden wedge. And also need the bearing capacity of the fixture to match the weight of the ceiling lamp, otherwise it will not achieve the effect of making the ceiling lamp firm!
2. When using expansion bolts for fixing, we must refer to the specifications of the bolts, because different bolt sizes are also required for the drilling diameter and depth of burial.
3. Led ceiling lamps need to take into account the installation of the wall can not have flammable materials, because there may be some home users directly behind the ceiling lamp for the appearance of the effect of the paint triangle, but in fact it is very dangerous. Because of the temperature of the lamps and flammables, it is very dangerous, although now the general insulation of the led lamps is better.
4. We mentioned the specification of the lampholder bolt just now, but we must also pay attention to the number of fixing holes on the base of the lamp, and the number of bolts and screws used for fixing should not be too small and must not be lower than 2. This is a standard to ensure safety, not only for your safety but also for your family's safety, so the installation must pay attention!
5. Led ceiling lamps must be checked before installation of each lamp wire core, and for the wire core to be different from the different cores, pierce the copper core of the wire can not be less than 0.44mm2, while the copper core is not Can be less than 0.5mm2.
6. In the wire and lamp to be fixed in order to avoid poor contact accidents, after reading these do you think your home led ceiling light installation is too simple, do not pay attention to it?
Our company was set up in 2002.We are using the advanced cold punch technology to produce spark plug which is similar to NGK and Champion technology.With such technology, the metal shell and ceramic are better protected the quality of the spark plug are more stable to get avoid from air leaking and broken.Our spark plug products are ranged into more than 100 models with an anual out put of 6 million pcs. Besides the advanced technology,we also have a strong advantage of automatical production.Most of our production device is automatical that we have very high,efficiency and stable quality.Throughout such years of developing,we have gained a good reputation at domestic motorcycle manufacturer.Furthermore,our products have been exported to South East Asia, Middle East, Australia and so on. Revolution,refine and devotion are our principal of working.Welcome to visit us and raise your demand and your comments request are our target to strive.
Iridium/Platinum Spark Plug
Platinum Spark Plugs,Laser Iridium Spark Plug,Ngk Platinum Spark Plugs,Ngk Iridium Ix Spark Plug
LIXIN INDUSTRIAL & TRADE CO.,Limited , https://www.kgvsparkplug.com