Use and maintenance method of concrete magnetic vibration table

The use and maintenance of concrete magnetic vibrator

(I) Usage 1. Adjust the preset dial switch on the program controller panel to the required vibration time (unit: second). Do not adjust the preset dial switch during vibration.

2. Place the test molds filled with concrete in the corresponding positions of the electromagnets in order, and turn on the electromagnet switch on the control panel. The test mold is firmly fixed on the vibration table.

3. Press the start switch on the panel of the controller to start the vibratory table and run it to the scheduled vibration time, automatically switch to the brake and automatically switch off the power after 7 seconds.

4. Turn off the electromagnet switch and try out the mold and the tabletop electromagnet. Then you can move the test mode.

(b) Maintenance 1. After the vibratory molding is completed, the residual concrete on the table shall be scrubbed.

2. Vibration motor and suspension bearings should be regularly filled with lubricating oil.

3, after use, should cut off the power.

4, the electromagnet can not be powered for too long, otherwise the coil is easily burned.

Installation of concrete magnetic shaker

1. The vibratory table is installed on the concrete foundation, and a rubber band larger than 5mm thick is interposed between the foundation and the base of the channel steel. The size of the anchor bolts is M16 × 390mm, four users bring their own, bolts through the ground 60mm, the location of the anchor bolts as "Figure 2". Shake table level should be maintained after installation.

2. Place the controller in a suitable position close to the vibration and insert the multi-line plug on the vibration stage into the multi-line socket of the controller. Plug the controller into a 3 to 380V power outlet.

3. To ensure safety, the connection between the vibration table and the controller is preferably worn in a hard plastic pipe or steel pipe, and it is solid and reliable to prevent damage to the cable.

4, should have a good grounding device

Alloy Steel Seamless Tube

Alloy Steel Seamless Pipe,Alloy Tube Seamless Steel Pipe,High Performance Alloy Steel Pipe,Carbon Alloy Steel Seamless Pipe

YUHONG GROUP CO.,LIMITED , https://www.alloypipeline.com