The steel market prices for various products have seen slight fluctuations compared to the previous day, last week, and the previous month. Below is a detailed update on key steel products:
**General Line:**
- Φ6.5mm Q235 (Masteel): 4,500 RMB/ton, unchanged from yesterday, down 50 RMB from last week, and down 120 RMB from the previous month.
- Φ8mm Q235 (Masteel): 4,500 RMB/ton, up 500 RMB from yesterday, down 120 RMB from last week.
**High Line:**
- Φ6.5mm Q235 (Masteel): 4,550 RMB/ton, unchanged from yesterday, down 30 RMB from last week, and down 100 RMB from the previous month.
- Φ10mm Q235 (Masteel): 4,550 RMB/ton, unchanged from yesterday, down 30 RMB from last week, and down 100 RMB from the previous month.
- Φ6.5-12mm Q335 (Jiyuan): 4,550 RMB/ton, stable over the past few days, with no change in the last week or month.
**Rebar:**
- Φ12mm HRB335 (Ma Steel): 4,700 RMB/ton, unchanged from yesterday, down 30 RMB from last week, and down 100 RMB from the previous month.
- Φ14-25mm HRB335 (Ma Steel - Hefei): 4,550 RMB/ton, stable, with a drop of 30 RMB from last week and 100 RMB from the previous month.
- Φ14-25mm HRB335 (Ma Steel - Anshan): 4,550 RMB/ton, same as Hefei.
- Φ16-25mm HRB335 (Yong Steel): 4,480 RMB/ton, stable, down 20 RMB from the previous month.
- Φ16-25mm HRB335 (Jinan Steel): 4,530 RMB/ton, down 30 RMB from last week and 70 RMB from the previous month.
- Φ16-25mm HRB335 (Angang): 4,530 RMB/ton, similar to Jinan Steel.
- Φ16-25mm HRB400 (Yonggang): 4,650 RMB/ton, down 50 RMB from last week and 130 RMB from the previous month.
- Φ16-25mm HRB400 (Jigang): 4,700 RMB/ton, down 80 RMB from last week and 90 RMB from the previous month.
- Φ16-25mm HRB400 (Ansteel): 4,650 RMB/ton, down 50 RMB from last week and 110 RMB from the previous month.
**Hot Rolled Coil:**
- 3.0mm*1500*C Q235 (Masteel): 4,950 RMB/ton, stable.
- 3.0mm*1500*C Q235 (Shagang): 4,950 RMB/ton, same as Masteel.
- 3.75mm*1500*C Q235 (Horse Steel): 4,750 RMB/ton, down 100 RMB from the previous month.
- 4.75mm*1500*C Q235 (Masteel): 4,750 RMB/ton, down 100 RMB from the previous month.
- 3.75mm*1500*C Q235 (Jiuquan Steel): 4,700 RMB/ton, down 100 RMB from the previous month.
- 4.75mm*1500*C Q235 (Jiu Steel): 4,700 RMB/ton, similar to Jiuquan.
- 5.5mm*1500*C Q235 (Jiuquan): 4,700 RMB/ton, down 100 RMB from the previous month.
- 5.75mm*1500*C Q235 (Jiuquan): 4,700 RMB/ton, same as above.
**Cold Rolled Sheets:**
- 1.0*1000*2000mm ST12 (Wugang): 5,600 RMB/ton, up 100 RMB from the previous month.
- 1.2*1250*2500mm ST12 (Wugang): 5,550 RMB/ton, up 100 RMB from the previous month.
- 1.5*1250*2500mm ST12 (Wugang): 5,550 RMB/ton, same as above.
- 2.0*1250*2500mm ST12 (Wugang): 5,550 RMB/ton, same as above.
- 1.0*1250*2500mm ST12 (Masteel): 5,600 RMB/ton, up 130 RMB from the previous month.
**Puzhong Plate:**
- 8mm Q235 (New Steel): 5,400 RMB/ton, stable.
- 10mm Q235 (Masteel): 5,180 RMB/ton, stable.
- 12-14mm Q235 (Masteel): 5,080 RMB/ton, stable.
- 16-25mm Q235 (Masteel): 5,080 RMB/ton, stable.
**Medium & Low Alloy Plates:**
- 16-25mm Q235 (Stanley Steel): 5,050 RMB/ton, stable.
- 8mm Q345 (New Steel): 5,480 RMB/ton, stable.
- 10mm Q345 (New Steel): 5,370 RMB/ton, stable.
- 12-14mm Q345 (New Steel): 5,200 RMB/ton, stable.
- 16-20mm Q345 (Masteel): 5,200 RMB/ton, stable.
**Threaded Plate:**
- 3.5mm*1250*C H-Q235 (Masteel): 4,750 RMB/ton, stable.
- 4.5mm*1250*C H-Q235 (Masteel): 4,750 RMB/ton, stable.
- 5.5mm*1250*C H-Q235 (Masteel): 4,750 RMB/ton, stable.
**Seamless Pipes:**
- 57*3.5 20# (Wuxi): 5,050 RMB/ton, stable.
- 60*4 20# (Wuxi): 5,050 RMB/ton, stable.
- 159*6 20# (Xinyu): 5,000 RMB/ton, stable.
- 325*9 20# (Cladding Steel): 5,300 RMB/ton, stable.
**I-Beams & Channels:**
- 25# Q235 (Wugang): 4,450 RMB/ton, stable.
- 36# Q235 (Laiwu): 4,450 RMB/ton, stable.
- 16# Q235 (Masteel): 4,600 RMB/ton, down 50 RMB from last week.
- 25# Q235 (Wugang): 4,600 RMB/ton, down 50 RMB from last week.
**Angle Steel:**
- 50*5mm Q235 (Ma Steel): 4,750 RMB/ton, stable.
- 80*8mm Q235 (Masteel): 4,630 RMB/ton, down 20 RMB from last week.
Overall, the steel market remains relatively stable, with minor price adjustments based on regional supply and demand dynamics.
Hardfacing Pipe
Hardfacing Pipe is produced through an
oscillating table with a welding head to arc weld the chromium carbide into the
inside of the pipe. We can handle diameters from 6" to 24" and then
we manufacture pipes from our chrome-plated sheets. The cover layer is
deposited perpendicular to the material flow through the pipe, resulting in a longer
wear life
Typical materials for cladding in common
use at HP Welding include HP700, HP700S, HP750X, HP750P and stainless steels,
as well as many less common alloys.
With over 30 years of experience on the
production of hardfacing products, and the technical expertise to back them up,
HP Welding can meet any base material and cladding combination.
The advantages of HP Hardfacing Pipe
1. Flat surface and nice appearance
2. Good weldability to others working
pieces
3. Excellent wear resistance
HP
Hardfacing Pipe can be widely applied to mining site, cement plant,
metallurgical equipment, dredging and power generation and any other fields
where need to combat with abrasion.
Alloy Steel Pipe,Hardfacing Iron Pipe,Chrome Alloy Hardfacing Super Wear Resistance Pipe
HuiFeng Wear Resistant Group , https://www.hpwearsolution.com